Oral Steroid: How to make liquid anavar

[Presser]

Oxandrolone is one of the hardest powders to convert into an oral suspension. It clumps and doest disperse evenly even after shaking it well.

Anyone know of a solid carrier suspension to use with anavar powder?

Oral steroid prefix test thread.

[Presser]

test reply

[thx]

Oxandrolone is one of the hardest powders to convert into an oral suspension. It clumps and doest disperse evenly even after shaking it well.

Anyone know of a solid carrier suspension to use with anavar powder?

Oral steroid prefix test thread.

PEG-300. It all depends, what concentration do you want to make?

[pgb]

test reply

draws ones attention to it. as for a recipe, i've use ora-plus 50% w/ a little honey and the rest with distilled water. granted i made it at 10 mg/ml for my wife. so that may be why it worked okay. my wife prefers a tablet instead. i've been experimenting with using oil. gsl isn't so good for taste. mct oil is a bit better. everything i've tried with it has worked so far. i also use alcohol base with honey, if it's something that clumps though, it doesn't work so well. just need to figure out how to make it with oil so it's a little more palatable.

[pgb]

i needed to edit my post, haven't tried oil for var, yet. don't have any powder on hand for it.

[Muscle mechanic]

I made it already had post up here somewhere. Had to shake it so very very very important to grind into the smallest particles u can...

I made 2 batches. 1 was with an old "Super-Solution" I had purchased years ago from Hardcore-powders a research shop around 6 years ago..
"Super-solution" didn't do it, so I drew out liquid and crushed sandy pieces at bottom of coffee cup and added a little 190 proof everclear then dumped rest back together. Think I had 20mg per ml and nasty!!!
Also added heat and couldn't get to melt. So had to shake!!! Was gross and gave me heart burn.. Think I may have bottle with rest at bottom still... lol!

The next time I capped them. I followed a guide and crushed and grinded then used whey protien to cut for desired mixture to cap.... made 50mg caps...

I will see if I can get a recipe on a liquid for MC but I would only cap but I will only get as made tabs if I desire them... lol!!

- - - Updated - - -

I will try and get recipes for u guys. I gotta do alot of digging but when I post one it can be trusted

[pgb]

I made it already had post up here somewhere. Had to shake it so very very very important to grind into the smallest particles u can...

I made 2 batches. 1 was with an old "Super-Solution" I had purchased years ago from Hardcore-powders a research shop around 6 years ago..
"Super-solution" didn't do it, so I drew out liquid and crushed sandy pieces at bottom of coffee cup and added a little 190 proof everclear then dumped rest back together. Think I had 20mg per ml and nasty!!!
Also added heat and couldn't get to melt. So had to shake!!! Was gross and gave me heart burn.. Think I may have bottle with rest at bottom still... lol!

The next time I capped them. I followed a guide and crushed and grinded then used whey protien to cut for desired mixture to cap.... made 50mg caps...

I will see if I can get a recipe on a liquid for MC but I would only cap but I will only get as made tabs if I desire them... lol!!

- - - Updated - - -

I will try and get recipes for u guys. I gotta do alot of digging but when I post one it can be trusted

as i recall, i used a mortar and pestle to grind mine up. made it real fine and that helped.

[Presser]

I made it already had post up here somewhere. Had to shake it so very very very important to grind into the smallest particles u can...

I made 2 batches. 1 was with an old "Super-Solution" I had purchased years ago from Hardcore-powders a research shop around 6 years ago..
"Super-solution" didn't do it, so I drew out liquid and crushed sandy pieces at bottom of coffee cup and added a little 190 proof everclear then dumped rest back together. Think I had 20mg per ml and nasty!!!
Also added heat and couldn't get to melt. So had to shake!!! Was gross and gave me heart burn.. Think I may have bottle with rest at bottom still... lol!

The next time I capped them. I followed a guide and crushed and grinded then used whey protien to cut for desired mixture to cap.... made 50mg caps...

I will see if I can get a recipe on a liquid for MC but I would only cap but I will only get as made tabs if I desire them... lol!!

- - - Updated - - -

I will try and get recipes for u guys. I gotta do alot of digging but when I post one it can be trusted

Lmao , quite literally everyone who has posted here over the years has always wound up trying to salvage what’s left of their oxandrolone anavar powder by capping the rest after their oral liquid recipes always clumped the dropper and never shook even! Myself included as anavar ain’t cheap! Lol

[thx]

Depending on what concentration you're making, PEG and 90-95% ethanol will dissolve most compounds. At least all the ones I've tried.

Using oil is not recommended, I've tried it a couple of times.

[pgb]

Depending on what concentration you're making, PEG and 90-95% ethanol will dissolve most compounds. At least all the ones I've tried.

Using oil is not recommended, I've tried it a couple of times.

good to know, i didn't have any when to try with oil. maybe get one of those mg spoons on amazon. figure the measure and just dump it in oj. lol.

[thx]

good to know, i didn't have any when to try with oil. maybe get one of those mg spoons on amazon. figure the measure and just dump it in oj. lol.

I read that oil will make aromasin get absorbed better, like 40% or something. So I had this great idea to try to make an oilbased aromasin solution. Aromasin is almost "flaky" so it was a really bad idea. Managed to dissolve some of it. But some just gathered on the bottom.

I later read that some pharma companies used ethanol to fully dissolve it at 20mg/ml or something. Never had any issues with dissolving gear with high grade ethanol.

So if you don't mind the taste, just use everclear.

[Metal85]

Make them into gummies instead of liquids

[Presser]

I read that oil will make aromasin get absorbed better, like 40% or something. So I had this great idea to try to make an oilbased aromasin solution. Aromasin is almost "flaky" so it was a really bad idea. Managed to dissolve some of it. But some just gathered on the bottom.

I later read that some pharma companies used ethanol to fully dissolve it at 20mg/ml or something. Never had any issues with dissolving gear with high grade ethanol.

So if you don't mind the taste, just use everclear.

No kidding! Anavar oxandrolone powder I would describe as flaky too just like you described the aromisin powder. I’ll bet oil suspension would work for the anavar as well with a little trial and error finding the right amount of alcohol to add in

[bluebeard]

I make liquid oral Proviron,Winny and Var
I have used Humco Syrpalta and also of late been using 50/50 mix of Ora Plus and Ora Sweet
Yes it is kinda grainy and can clump
You just gotta shake it well each time before using
But it gets the job done

[Presser]

OXandrolone is a bitch